19.8" x 24" KELLENBERGER "SWISS" "HIGH PRECISION"
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
THIS MACHINE HAS FACTORY RISERS, CAN SWING 19.8"
THREE WHEELHEAD MACHINE - O.D./I.D./FACE GRINDING
MODEL: 600U-175 S/N: 613574 NEW: 1994
MAX. SWING w/FACTORY RISERS ............... 19.8"
DISTANCE BETWEEN CENTERS (NOMINAL)......... 23- 5/8"
DISTANCE BETWEEN CENTERS W/TAILSTOCK
OVERHANGING ............................. 29- 1/2"
TABLE:
LONGITUDINAL TABLE TRAVEL ................. 35- 7/16"
LONGITUDINAL TABLE TRAVEL PER
TURN OF HANDWHEEL:
COARSE .................................. 0.8"
FINE .................................... 0.1"
LONGITUDINAL TABLE SPEED (HYDRAULIC) ...... 0 TO 20 FPM
TABLE SWIVELS ............................. 11 DEGREES
REVERSING DWELL ........................... 0 TO 5 SECONDS
GRINDING WHEEL INFEED:
1 GRADUATION OF FEED SCALE .............. 0.0002"
AUTOMATIC HYDRAULIC INFEED, ............. 0 TO 0.037"
AUTO INFEED PER TABLE REVERSAL .......... 0.00004" TO 1.18"
PLUNGE GRINDING: INFEED SPEED ........... 0.00001 TO .0001 IN/S
MICROMETER STOP, 1 GRADUATION ........... 0.00005"
UNIVERSAL GRINDING SPINDLE HEAD:
TRANSVERSE MOVEMENT OF WHEEL SLIDE ...... 8- 21/32"
INFEED PER REV. OF HANDWHEEL: COARSE ... 0.3"
FINE ..... 0.04"
HYDRAULIC RAPID WHEEL SLIDE
ADVANCE/RETRACTION STROKE .............. 1-9/16"
GRINDING WHEEL SPEEDS ................... 1500, 1700, 2200 RPM
GRINDING WHEEL FOR CYLINDRICAL
GRINDING ............................... 16" X 2" X 5"
GRINDING WHEEL (SURFACE GRINDING)........ 9" X 1/2" X 3"
SWIVEL OF GRINDING HEAD
W/LOCKING EVERY 90 DEGREES ............. 270 DEGREES
WORKHEAD:
INFINIT. VARIABLE SPINDLE SPEEDS ........ 6 - 600 RPM
WORKHEAD SWIVELS ........................ 360 DEGREES
INSIDE TAPER OF WORK SPINDLE ............ #5MT
TAILSTOCK:
INSIDE TAPER OF SPINDLE ................. #4MT
STROKE OF SPINDLE ........................ 1- 3/16"
APPROXIMATE FLOOR SPACE REQUIRED .......... 102" X 64" X 66"H
APPROXIMATE MACHINE WEIGHT ................ 6,000 LBS
MACHINE FEATURES:
HYDRAULIC OPERATION FEATURING:
-SINGLE LEVER CONTROL
-INFINITELY VARIABLE TABLE TRAVERSE
-AUTOMATIC INFEED
-PLUNGE INFEED
-RAPID WHEEL ADVANCE & RETRACTION
SPARKOUT TIMER
DUAL LEFT-HAND & RIGHT-HAND WHEEL MOUNTING
EQUIPPED WITH:
- 19.8 SWING, WITH FACTORY ISSUE RISERS FROM KELLENBERGER
- ADJUSTABLE RISE & FALL MECHANISM OF WHEELHEAD BY TURN OF HANDWHEEL
- TAILSTOCK HAS "MICRO-CORECTION" OF TAPER - FOR HIGH ACCURACY WORK
- SWING AROUND INTERNAL GRINDING ATTACHMENT
- (1) INTERNAL GRINDING SPINDLE, GRINDING WHEEL ON SPINDLE IS 3" DIA.
- FACE GRINDING WHEELHEAD SET-UP, WITH 9" DIA. WHEEL
- 16" O.D. WHEEL
- 9" MAGNETIC CHUCK WITH ADAPTOR PLATE & DRAW BAR
- STANDARD WORKHEAD W/DUAL LIVE & DEAD WORKHEAD SPINDLE
- TABLE MOUNTED SWING BACK DIAMOND DRESSER WITH MICROMETER ADJUSTMENT,
WITH MOUNTING BLOCK FOR CORRECT CENTER HEIGHT
- SET OF DRIVE DOGS
- ASSORTMENT OF CENTERS
- ASSORTMENT OF WRENCHES, AND WHEEL PULLER FOR REMOVING THE GRINDING WHEEL
- 4 H.P. WHEELHEAD MOTOR
- COOLANT SYSTEM
- MACHINE IS PRESENTLY WIRED FOR 3/60/460 VOLTS
** EXCELLENT CONDITION & APPEARANCE (ORIGINAL PAINT) **
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
CONTACTO 
