New Supertec CNC Die Sinker EDM w/30 Amp Power Supply
SYSTEM 3R "C" AXIS PROGRAMMABLE INDEXING SPINDLE
Model: CNC-330 Made In Taiwan
Machine Specifications
X & Y Axis Travel: 11.8" x 9.8"
Z Axis (quill) travel: 5.9"
W Axis (head) travel: 5.9"
Dist. between work table and machine head: 7.5" - 19"
Max Work Piece: 29" x 20" x 14"
Max Work Piece Weight: 880 lbs.
Max electrode weight: 220 lbs.
Work Tank capacity: 75 gal
Work Table area (L & W): 23.6" x 11.8"
Machine Net Weight: 2,420 lbs.
Packing size: 53" x 52" x 86"H
Currancy 30 Amps
Power Input: 3 KVA
Max Metal Removal Rate Cubic Inch/Hr: 1.40
Electrode Wear Ratio%: 0.2%
Best Surface Roughness: 0.30
CNC Die Sinker EDM Specifications:
X,Y, & Z Axes are driven by DC Servo motors with high efficiency PWM drivers
for greater torque.
One micron linear scale feed back on X,Y and Z axis for greater repeatability.
PC based control with user friendly conversational lauguage that is easy to
learn and easy to operate.
Special canned cycles such as instant edge finding, conter locating, reference
point locating, reference point locating, multi-coordinate memory, and 499 sets
of working parameters.
Automatic multi-step machining, from rough to fine burn.
Rapid up and down of Z-Axis.
Plane rotating and single side burning cycles for all 3 axes in all 6 directions.
An isopuls and isopower discharging circuit reduces electrode wear and
ensures uniform finish of the work piece and a faster burning speed.
The "extra fine" cycle provides 20% faster burning time than conventional
EDMs
Three Axis DRO
The fine burning function allows for a compbination of up to 10 coarse,
medium, and fine burning cycles for faster burning times.
Standard Accessories:
Machine lamp
Automatic Lube System
Nozzles (2)
1/2" Chuck
Automatic fire extinguisher
Oil filter (2)
Tool box with tools
Operating/programming manual, parts list and accuracty report
CONTACTO 
