11" X 30" HARRISON ENGINE LATHE
MODEL: M250, S/N 250129, NEW 1983
SPECIFICATIONS:
SWING OVER BED ..................... 11"
SWING OVER CROSS SLIDE ............. 7"
DISTANCE BETWEEN CENTERS ........... 30"
SPINDLE NOSE, CAMLOCK, TYPE ........ D-1-3
HOLE THROUGH SPINDLE ............... 1-1/4"
(9) SPINDLE SPEEDS, DIAL SELECTED,
THREE RANGES ..................... 52-2,000 R.P.M.
TAILSTOCK SPINDLE DIAMETER ......... 1-1/2"
TAILSTOCK SPINDLE TRAVEL ........... 3-1/2"
INCH THREAD RANGE .................. 4 TO 84 T.P.I.
METRIC THREAD RANGE ................ 0.4 TO 10 MM
(36) FEEDS: LONGITUDINAL ........... 0.0006 TO 0.016 I.P.R.
TAPER OF HEADSTOCK AND
TAILSTOCK SPINDLE CENTERS ........ #2 MORSE
APPROXIMATE DIMENSIONS ............. 69" L-R X 30" F-B X 46" H
APPROX WEIGHT ...................... 1,010 LBS.
EQUIPPED WITH:
- ALL-GEARED HEADSTOCK
- UNIVERSAL GEARBOX FOR TOTAL INCH/METRIC THREADING CAPABILITY
- INDUCTION HARDENED AND GROUND BEDWAYS
- 6" DIAMETER BUCK SIX-JAW CHUCK WITH EXTRA SET OF REVERSING JAWS
- ROYAL HANDLEVER OPERATED DRAW BAR FOR TYPE 5C COLLETS (LESS NOSE PIECE)
- TOOLPOST WITH (2) TOOL HOLDERS
- ELECTRO-MAGNETIC SPINDLE BRAKE WITH FOOT TREADLE CONTROL
- THREADING DIAL
- MICROMETER CARRIAGE STOP
- TAILSTOCK WITH (1) 0-1/2" CAPACITY JACOBS KEY-TYPE DRILL CHUCK AND (1) PLAIN CENTER
- 5-POSITION BED TURRET
- WORK LIGHT
- COOLANT PUMP AND TANK WITH FULL LENGTH REAR SPLASH GUARD
- 1.5 H.P. 3/60/230-460 VOLT SPINDLE DRIVE MOTOR AND ELECTRICAL CONTROLS
- MACHINE IS WIRED FOR 3/60/208 VOLT OPERATION.
CONTACTO 
