| Estatus: | CERRADO | | Id# | 16993 | | Ref: | 9815 | | Nombre: | 4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND | | Fabricante: | 4500 WATT MITSUBISHI | | Modelo: | 3015LVP | | Año: | 2011 ( Usado ) | | Localización: | USA | | Precio: | | | | | |
|---|
| Descripción: | 4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND
PINION, DIRECT DRIVE LASER
MFG:2011 - TOTAL HOURS: 11,400 - CUT HOURS: 3,944
Machine structure: Precision rack and pinion, direct drive
Travel drive method: X,Y, Z simultaneous 3 axes
Control method: X,Y, Z simultaneous 3 axis control
X-Axis stoke: 122.05\"
Y-Axis stroke: 61.02\"
Z-Axis Stroke: 3.54\"
Maximum work piece size: 120.08\" x 60.04\"
Maximum processing feed rate: 1180 inches per minute
Maximum workpiece weight: 2050 lbs.
Table pass height: 33.5\"
Rapid travel speed
Single axis: 3345 inches per minute
Simultaneous: 4730 inches per minute
Minimum command input: 0.001mm/.0001\"
Drive motor type: intelligent AC servo
Machine unit dimensions: 418.5\" L x 90.6\" H x 183\" W
Total system weight: 26,325 lbs.
Pallet change time: Approximately 25 seconds
Pallet changer weight: 4500 lbs.
Pallet changer drive mechanism: chain
Installation dimensions: 473.4\" x 227.7\"
Floor space requirement: 750 sq. ft.
Electrical requirements: 208 VAC ± 5%, 3 phase, 60 Hz
Motion system, CNC control: 71 KVA (Total machine usage)
Laser resonator: 202 (Full load Amps)
CNC controller specifications
Model: Mitsubishi LC20BP2
Type: Self contained-simple dust proof design (mounted on processing machine)
CPU: 64 Bit
Display unit: 10.4\" TFT color LCD touch screen
Hard disc drive capacity: 2.0 GB
Program memory capacity, standard: 5000m/approximately 2 MB with 400 register
able programs
CO2 laser control
Power control: Output power, frequency duty
Operation control: Shutter open/close, beam on/off. Laser gas change, etc.
Processing machine control
Drive method: X,Y, Z (Simultaneous control)
Position detection: encoder
Minimum command unit: .001mm/.0001\"
Program input method: 3.5\" floppy, computer link, Ethernet LAN
Operation method: Memory operation, HD direct drive
Laser resonator specifications
Model: Mitsubishi 45CF-R
Excitation method: 3-axis cross flow, SD
Control method: power feedback
Power stability: ± 1 %
Beam mode: Low-order (main component TEM01)
Beam outer diameter: 1.02\"
Beam divergence: Approximately 3.5\" or less (total angle)
Wave length: 10.6 microns
Frequency setting range: 10~3000 Hz
Duty range: 0~100 % adjustable
Output power adjustable range: 0~100% of rating
Resonator unit dimensions: 98.4\" long x 71.3\" High x 31.5\" wide
Resonator unit weight: 4850 lbs
Rated output power (CW): 4500 watts
Composition (CO2:CO:N2:He): 8:4:60:28
Consumption amount: 3 liters per hour
Gas sealing time: 24 hours during continuous oscillation
|
|---|
|
|---|
| |
| |
|
|
|
|
|
|
Que aparecen en esta página 4500 WATT MITSUBISHI 3015LVP (PLUS II)-45 CF-R, PRECISION RACK AND tiene la condición de "CERRADO", lo que significa que el presente anuncio de venta ya NO es válido.
Sin embargo, con la tecla "CONTACTO con el Vendedor", usted puede pedir al vendedor, que podría tener que vender 4500 WATT MITSUBISHI 3015LVP .
Si usted no puede encontrar la máquina que está buscando -
suscribirse a la MachineKs.com y lugar GRATIS Anuncio de compra.
Si usted tiene equipo para la venta - el categoría La otra maquinaria metalúrgica junto con una 4500 WATT MITSUBISHI 3015LVP en la lista, es sólo una entre cientos de otros, donde en pocos minutos publique sus anuncios de venta. |
|---|
|
|
|
CONTACTO 
