| Estatus: | CERRADO | | Id# | 14563 | | Ref: | 143913 | | Nombre: | 10Inch Swing 16Inch Centers Cincinnati-Milacron R-58 OD GRINDER, swing down i.d., | | Fabricante: | Cincinnati-Milacron | | Modelo: | R-58 | | Año: | 1974 ( Usado ) | | Localización: | USA | | Precio: | $0.00 | | | | |
|---|
| Descripción: | 10Inch X 16Inch CINCINNATI MILACRON InchPRECISIONInch PLAIN
CYLINDRICAL GRINDER
MODEL: R-58 S/N: 27634 NEW: 1975
SPECIFICATIONS:
MAXIMUM DISTANCE BETWEEN CENTERS..................... 16Inch
MAXIMUM SWING OVER TABLE............................. 10Inch
MAXIMUM WEIGHT OF WORKPIECE BETWEEN CENTERS...... 165 LBS
MAXIMUM WEIGHT OF CHUCK HELD WORK................. 33 LBS
TABLE:
TABLE TRAVERSE SPEEDS, INFINITELY VARIABLE..... 2-240 IPM
TABLE TRAVERSE PER REVOLUTION OF HANDWHEEL...... 0.1Inch-.5Inch
MINIMUM MOVEMENT NECESSARY TO REVERSE TABLE........ 5/32Inch
MAXIMUM SWIVEL OF TABLE..................... +/-14 DEGREE
HEADSTOCK:
NUMBER OF SPEEDS................................ INFINITE
SPEED RANGE................................... 60-500 RPM
DIAMETER OF BORE IN SPINDLE......................... 1.4Inch
HEADSTOCK SPINDLE NOSE-AMERICAN LATHE STANDARD........ 5Inch
CENTER TAPER.................................... #6 JARNO
SWIVEL....................................... 0-90 DEGREE
FOOTSTOCK:
CENTER TAPER.................................... #6 JARNO
QUILL RETRACTION.................................... 0.8Inch
WHEELHEAD:
RAPID ADVANCE STROKE.................................. 2Inch
MANUAL INFEED PER HANDWHEEL REVOLUTION (DIA.)..... 0.050Inch
AUTO PICKFEED ON DIAMETER................. 0.0002Inch-.0016Inch
HAND LEVER COMPENSATION ON DIAMETER.............. 0.0001Inch
GRINDING WHEEL SIZE......... 16Inch O.D. X 2Inch WIDE X 5Inch HOLE
APPROXIMATE WEIGHT............................. 4,500 LBS
EQUIPPED WITH:
HYDRAULIC OPERATION FEATURING:
-HYDRAULIC TABLE TRAVERSE
-DUAL RATE PLUNGE INFEED (COARSE & FINE FEED SELECTIONS)
-INFINITELY VARIABLE HYDRAULIC TRAVERSE WITH PICKFEED
AMOUNTS FROM .0002Inch TO .0016Inch (DIAMETER REDUCTION) IN
EIGHT STEPS WHICH CAN BE SET AT InchLEFT END ONLY,Inch RIGHT
END ONLY,Inch LEFT AND RIGHT ENDInch OF TABLE REVERSAL, OR
InchOFFInch
-POWER RAPID WHEELHEAD ADVANCE & RETRACTION
-SPARKOUT TIMER
SWIVEL TABLE ALLOWING FOR GRINDING OF PARTS WITH TAPERS
UP TO 28 DEGREES INCLUDED ANGLE
TWO SPEED (COARSE AND FINE) TABLE TRAVERSE HANDWHEEL
1 H.P. UNIVERSAL MOTORIZED HEADSTOCK WITH COMBINATION
LIVE & DEAD WORKHEAD SPINDLE
LEVER-TYPE FOOTSTOCK WITH CENTER
COOLANT SYSTEM
AUTOMATIC LUBRICATION TO TABLE AND WHEELHEAD WAYS
1 H.P. HYDRAULIC PUMP MOTOR AND TANK
5.5 H.P. 3/60/230-460 VOLT WHEELHEAD DRIVE MOTOR
MACHINE IS WIRED FOR
*** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE ***
|
|---|
|
|---|
| |
| |
|
|
|
|
|
|
Que aparecen en esta página 10Inch Swing 16Inch Centers Cincinnati-Milacron R-58 OD GRINDER, swing down i.d., tiene la condición de "CERRADO", lo que significa que el presente anuncio de venta ya NO es válido.
Sin embargo, con la tecla "CONTACTO con el Vendedor", usted puede pedir al vendedor, que podría tener que vender Cincinnati-Milacron R-58.
Si usted no puede encontrar la máquina que está buscando -
suscribirse a la MachineKs.com y lugar GRATIS Anuncio de compra.
Si usted tiene equipo para la venta - el categoría Rectificadoras cilÃndricas, Simples junto con una Cincinnati-Milacron R-58 en la lista, es sólo una entre cientos de otros, donde en pocos minutos publique sus anuncios de venta. |
|---|
|
|
|
CONTACTO 
